Description

MAX is a one-component adhesive, without solvents or isocyanates. It is a completely safe, stable and resistant product, intended for domestic and professional use. It is characterized by excellent resistance to climatic conditions and strong adhesion, even on slightly damp surfaces. It can be successfully used indoors and outdoors. It is suitable for mounting: decorative strips for walls, ceilings and floors, as well as stucco elements Concrete, metal (including steel), zinc, PVC, ceramics, glass, epoxy resin, polyester and painted wooden surfaces. Gluing MAX panels is characterized by a very short drying time. It only takes 8 seconds for the glue to bond and secure the stucco stably and permanently to the surface. In order to obtain an optimal result when laying the strips, it is recommended to apply a minimum quantity of product to the inner edge of the stucco (adhesive layer thickness of approximately 2 mm). Then place the strips on the gluing surface, press and hold for 8 seconds so that the glue can fully develop its initial adhesion. It will also be useful for hiding joints and filling small irregularities. After drying, the glue can be easily painted in any color. Due to the possibility of chemical reactions, it is recommended to test on a small fragment before painting. In order to achieve the best results, we recommend appropriate surface preparation before bonding. The wall must be degreased, dusted, dry, stable, without peeling paint or crumbling plaster. MAX advantages: Extremely high initial adhesion Up to 270 kg/m² Extremely high final strength Up to 370 kg/10 cm² Possible installation on slightly damp surfaces Solvent-free product If it is necessary to clean the surface of fresh glue, we recommend immediately using a solvent and degreaser. In the case of a hardened product, it will be necessary to remove the glue mechanically. Limitation of use: Do not use the following materials for fixing: PE, PP, PC, PMMA, PTFE, neoprene, bituminous substrates, for example. Do not use in places in permanent contact with water, for example swimming pools. Do not use on natural stone and mirrors