TIGA S starter mounting clip – pack of 50 pieces
60,22 € HT72,26 € TTC
DIAMOND
DIAMANT profile — diamond-point chamfer, a sought-after sculptural look. Thermally treated Scandinavian pine, modified classe d'emploi 3, biocide-free, compliant with RE2020 and anticipating RE2028 (1 January 2026).
15
products
Thermo-treated pine square timber 4,2 × 4,2 cm, natural grade
4,87 € HT5,84 € TTC
Thermo-treated pine rhombus cladding AB 4,2 x 4,2 cm
4,64 € HT5,57 € TTC
TIGA S fastening clip – Pack of 100 units
67,61 € HT81,13 € TTC
26×68 Thermo Pin ROMB TIGA class AB – hidden installation
59,24 € HT71,09 € TTC
23×68 Spruce ROMBx1 class AB
27,72 € HT33,26 € TTC
Scandinavian spruce 24×68 ROMB class AB
23,56 € HT28,27 € TTC
19×92 Thermo Pin ROMB class AB
44,49 € HT53,39 € TTC
26×68 Thermo Pin ROMB class AB
57,48 € HT68,97 € TTC
FACADE Scandinavian Spruce 19×196 class AB
18,33 € HT21,99 € TTC
24×68 Scandinavian spruce ROMB class C
14,58 € HT17,49 € TTC
19×140 Thermo Pin ROMB class AB
45,03 € HT54,04 € TTC
19×68 Thermo Pin ROMB class AB
47,38 € HT56,86 € TTC
FACADE Scandinavian Spruce 19×189 class AB
21,91 € HT26,29 € TTC
19×117 Thermo Pin ROMB class AB
41,56 € HT49,87 € TTC
Top sellers in this category
TIGA S fastening clip – Pack of 100 units
67,61 € HT81,13 € TTC
TIGA S starter mounting clip – pack of 50 pieces
60,22 € HT72,26 € TTC
Thermo-treated pine square timber 4,2 × 4,2 cm, natural grade
4,87 € HT5,84 € TTC
Thermo-treated pine rhombus cladding AB 4,2 x 4,2 cm
4,64 € HT5,57 € TTC
FACADE Scandinavian Spruce 19×189 class AB
21,91 € HT26,29 € TTC
The profile at a glance
The DIAMANT profile belongs to the Dartank thermally modified pine cladding family. Every one of our references is made from Scandinavian pine thermally modified at 200 °C, with no chemicals at all. The wood fibre is modified right through — high dimensional stability, increased resistance to fungi and insects.
Ventilated installation — the essential rules
Fixed to vertical or horizontal battens, with a breather membrane compulsory behind and a ventilated air gap of at least 20 mm. Fixings in A2 stainless steel (A4 by the sea) — Torx screws with a reduced countersunk head, or concealed clips depending on the profile.
Compliant with the requirements of DTU 41.2 (the French standard for exterior timber cladding).
Natural silver-grey patina
Left untreated, thermally modified pine turns a natural silver-grey within 8 to 18 months — a look much sought after in contemporary architecture. With a saturating oil applied every 2 to 4 years, the original brown tone is preserved.
Help & advice
Frequently asked questions
Everything you need to know before ordering. Another question? Contact us.
DIAMANT is a thermally modified pine cladding profile — a specific machining of the board (grooves, chamfer, spacing) that defines its architectural look and its fixing method. It belongs to the Dartank thermally modified pine cladding family, in modified use class 3.
An air gap of at least 20 to 25 mm between the breather membrane and the cladding. Essential for moisture to escape — without it the timber will rot, even thermally modified.
Not necessarily. Left untreated, thermally modified pine turns a natural silver-grey within 8 to 18 months — a look widely sought after in contemporary architecture. With a wood oil (every 2-4 years), the brown tone is preserved.
A2 stainless steel screws (standard façade) or A4 (seafront, saline environments). Reduced countersunk head with Torx drive; trade brands: SPAX Façade, Essve, RothoBlaas, PGB.