Pilaster-Core PR4
from 21,83 € HT26,19 € TTC
Pilasters
The pilaster shaft is the central element — the vertical section between capital and base. Our PR1 to PR1 references come in smooth or fluted designs (up to 4 vertical flutes) for a discreet or more pronounced relief effect.
1
products
Top sellers in this category
Material and durability
Our decorative pilasters are made from high-density expanded polystyrene (EPS) coated with a 3-4 mm acrylic polyurethane coating. Lightweight (10 to 20 times lighter than stone), rot-proof and resistant to UV, frost and everyday knocks.
Simplified installation
Fitted by bonding with a special exterior adhesive sealant (applied as a bead on the back), pressing lightly against the substrate. For bulky pieces, add a few hammer-in anchors as reinforcement. Supplied ready to paint — primer + acrylic facade paint.
Help & advice
Frequently asked questions
Everything you need to know before ordering. Another question? Contact us.
By bonding with a special exterior adhesive sealant: apply a bead on the back, press the piece against the wall and wipe off the excess with a damp cloth. For bulky pieces, add hammer-in wall plugs as well.
An exterior acrylic façade paint, applied over a suitable primer. In any colour you like.
15 to 25 years on average, depending on exposure. The polyurethane coating resists UV, water and frost.