31×142 Thermo Sosna MCR ROMB x3V class AB
On request
BLACK♮
NOIR&NATUR profile — two-tone black / natural finish for a contemporary two-tone façade. Thermally modified Scandinavian pine, modified use class 3, biocide-free, RE2020-compliant and ready for RE2028 (1 January 2026).
3
products
25×92 Thermo Sosna MCR ROMB x3V class AB
On request
25×142 Thermo Sosna MCR ROMB x2 class AB
On request
Top sellers in this category
The profile at a glance
The NOIR&NATUR profile belongs to the Dartank thermally modified pine cladding family. Every one of our references is made from Scandinavian pine thermally modified at 200 °C, with no chemicals at all. The wood fibre is modified right through — high dimensional stability, increased resistance to fungi and insects.
Ventilated installation — the essential rules
Fixed to vertical or horizontal battens, with a breather membrane mandatory behind and a ventilated air gap of at least 20 mm. Fixings in A2 stainless steel (A4 by the sea) — Torx screws with a reduced countersunk head, or concealed clips depending on the profile.
Compliant with the requirements of DTU 41.2 (the French standard for exterior timber cladding).
Natural silver-grey patina
Left untreated, thermally modified pine turns a natural silver-grey within 8 to 18 months — a look much sought after in contemporary architecture. With a saturating oil applied every 2 to 4 years, the original brown tone is preserved.
Help & advice
Frequently asked questions
Everything you need to know before ordering. Another question? Contact us.
NOIR&NATUR is a thermally modified pine cladding profile — a specific machining of the board (grooves, chamfer, spacing) that defines its architectural look and its fixing method. It belongs to the Dartank thermally modified pine cladding family, in modified use class 3.
An air gap of at least 20 to 25 mm between the breather membrane and the cladding. Essential for moisture to escape — without it the timber will rot, even thermally modified.
Not necessarily. Left untreated, thermally modified pine turns a natural silver-grey within 8 to 18 months — a look widely sought after in contemporary architecture. With a wood oil (every 2-4 years), the brown tone is preserved.
A2 stainless steel screws (standard façade) or A4 (seafront, saline environments). Reduced countersunk head with Torx drive; trade brands: SPAX Façade, Essve, RothoBlaas, PGB.