19×90 Thermo Sosna UTS+ class AB
On request
UTS+
UTS+ profile — the premium class AB version, a superior finish for highly exposed façades. Scandinavian thermally modified pine, modified use class 3, biocide-free, compatible with RE2020 and already anticipating RE2028 (1 January 2026).
12
products
19×90 Thermo Sosna UTS+ Colorless class AB
On request
19×90 Thermo Pin UTS+ Dark brown class AB
On request
Brushed board Thermo Sosna 19×140 UTS+ HONEY WOOD class AB
On request
Thermo Sosna brushed panel 19×140 UTS+ URBAN GRAY class AB
On request
19×140 Thermo Pin UTS+ Colorless class AB
On request
Thermo Sosna brushed panel 19×140 UTS+ GRAPHITE GRAY class AB
On request
19×140 Thermo Pin UTS+ Dark Brown class AB
On request
Brushed board Thermo Sosna 19×140 UTS+ SPECIAL BLACK class AB
On request
Thermo Sosna brushed panel 19×90 UTS+ URBAN GRAY class AB
On request
19×140 Thermo Sosna UTS+ class AB
On request
19×140 Thermo Frake class UTS+ NATUR
On request
Top sellers in this category
19×90 Thermo Sosna UTS+ class AB
45,22 € HT54,26 € TTC
19×90 Thermo Sosna UTS+ Colorless class AB
64,45 € HT77,34 € TTC
19×90 Thermo Pin UTS+ Dark brown class AB
64,45 € HT77,34 € TTC
Brushed board Thermo Sosna 19×140 UTS+ HONEY WOOD class AB
64,45 € HT77,34 € TTC
Thermo Sosna brushed panel 19×140 UTS+ URBAN GRAY class AB
64,45 € HT77,34 € TTC
The profile at a glance
The UTS+ profile belongs to the Dartank thermally modified pine cladding family. Every one of our references is made from Scandinavian pine thermally modified at 200 °C, with no chemicals whatsoever. The wood fibre is modified right through — high dimensional stability, greater resistance to fungi and insects.
Ventilated installation — the essential rules
Fitted on vertical or horizontal battens, with a breather membrane mandatory behind and a ventilated air gap of at least 20 mm. Fixings in A2 stainless steel (A4 by the sea) — Torx screws with a reduced countersunk head, or concealed clips depending on the profile.
Compliant with the requirements of DTU 41.2 (the French standard for exterior timber cladding).
Natural silver-grey patina
Left untreated, thermally modified pine turns a natural silver-grey within 8 to 18 months — a look much sought after in contemporary architecture. With a saturating oil applied every 2 to 4 years, the original brown tone is preserved.
Help & advice
Frequently asked questions
Everything you need to know before ordering. Another question? Contact us.
UTS+ is a thermally modified pine cladding profile — a specific machining of the board (grooves, chamfer, spacing) that defines its architectural look and its fixing method. It belongs to the Dartank thermally modified pine cladding family, in modified use class 3.
An air gap of at least 20 to 25 mm between the breather membrane and the cladding. Essential for moisture to escape — without it the timber will rot, even thermally modified.
Not necessarily. Left untreated, thermally modified pine turns a natural silver-grey within 8 to 18 months — a look widely sought after in contemporary architecture. With a wood oil (every 2-4 years), the brown tone is preserved.
A2 stainless steel screws (standard façade) or A4 (seafront, saline environments). Reduced countersunk head with Torx drive; trade brands: SPAX Façade, Essve, RothoBlaas, PGB.