140×160 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
KVH C24
KVH C24 (Konstruktionsvollholz) is finger-jointed solid timber, kiln-dried to below 18% moisture content, planed on all four sides and calibrated to the millimetre. The essential European standard for timber-frame construction and modern roof carpentry.
63
products
60×140 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
100×220 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
100×100 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
60×200 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
100×300 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
140×140 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
100×240 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
140×260 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
60×80 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
80×140 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
60×100 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
80×120 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
160×160 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
120×220 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
120×200 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
120×140 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
160×180 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
100×200 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
60×220 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
120×160 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
100×120 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
60×300 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
80×80 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
On request
Top sellers in this category
140×160 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
24,05 € HT28,86 € TTC
60×140 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
8,33 € HT9,99 € TTC
100×220 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
22,36 € HT26,83 € TTC
100×100 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
10,16 € HT12,19 € TTC
60×200 CONSTRUCTION TIMBER Spruce KVH C24 Nsi
11,88 € HT14,25 € TTC
63 sections available, from wall framing to floor joists
- Framing sections (6×10, 6×12, 6×14, 6×16, 6×18 cm) — vertical studs, bottom and top plates, noggings, load-bearing partitions.
- Joisting sections (8×16, 12×16 cm) — floor joists, rafters, suspended ceilings, mezzanines.
NSI or Si, what it changes
KVH NSI (Non-Sichtqualität): standard industrial quality, ideal for concealed framing — the bulk of our range.
KVH Si (Sichtqualität): visual grade selected for appearance — exposed mezzanines, framing left visible in a loft, interior structures on show.
Advantages over traditional structural timber
KVH C24 delivers unrivalled dimensional stability: no splitting after installation, minimal shrinkage, millimetre-accurate jointing — a major time saver on site.
CE marking is mandatory on every piece, strength class C24 to EN 14081, compliant with Eurocode 5 for structural calculation.
Help & advice
Frequently asked questions
Everything you need to know before ordering. Another question? Contact us.
Three reasons: technical drying (moisture content ≤ 18 %, no shrinkage), precise sizing (time saved on assembly) and CE marking with a certified C24 class — essential in regulated construction.
Standard 6×14 or 6×16 cm depending on the insulation thickness. The 6×14 takes 140 mm of insulation, the 6×16 goes up to 160 mm — choose according to your target R-value with bio-based insulation.
Our Scandinavian spruce KVH comes mainly from PEFC-certified forests. Chain-of-custody certificate on request for commercial buildings or public contracts.
Up to 13 m as standard thanks to finger-jointing. Sections < 8×16 cm are supplied in 5 to 12 m. Beyond that: quotation on request.