Keystone B7
20,99 € HT25,19 € TTC
Exterior mouldings
Our façade moulding range covers every exterior decorative element: cornices, pilasters, columns, window surrounds, rosettes, balusters, rustication and quoins. Every piece is made of high-density expanded polystyrene coated with a UV-resistant polyurethane render — a lightweight, durable and cost-effective alternative to traditional fibrous plaster.
524
products
Subcategories
Under the window sill P10
24,09 € HT28,91 € TTC
Keystone B1
17,18 € HT20,61 € TTC
LB3 teething paste
10,01 € HT12,01 € TTC
Under the window sill P5
20,44 € HT24,53 € TTC
Under the window sill P1
22,73 € HT27,27 € TTC
Keystone B5
20,61 € HT24,73 € TTC
Under the window sill P9
29,19 € HT35,03 € TTC
LB4 teething paste
10,01 € HT12,01 € TTC
Keystone B8
29,31 € HT35,17 € TTC
Right corner BS4 - 36
17,15 € HT20,58 € TTC
GO6 window cornice
69,46 € HT83,35 € TTC
GO9 window cornice
25,83 € HT30,99 € TTC
Under the window sill P7
20,44 € HT24,53 € TTC
Keystone B1D
20,61 € HT24,73 € TTC
Straight cornersBS3 - 75
37,53 € HT45,03 € TTC
Fronton NA6
142,48 € HT170,98 € TTC
Right corner BS2 - 75
37,53 € HT45,03 € TTC
Under the window sill P6
20,44 € HT24,53 € TTC
LB1 teething paste
10,01 € HT12,01 € TTC
GO3 window cornice
36,69 € HT44,03 € TTC
Right corner BS6W - 50
22,42 € HT26,90 € TTC
Facade profile L18
14,44 € HT17,33 € TTC
Under the window sill P11
20,44 € HT24,53 € TTC
Top sellers in this category
Why EPS polystyrene + PU coating ?
Our mouldings are built around a high-density EPS expanded polystyrene core, covered with a 3 to 4 mm layer of acrylic polyurethane coating. This composite offers an excellent weight-to-strength ratio — light enough not to overload the structure, and tough enough to withstand the weather (rain, frost, heat, UV).
Compared with traditional fibrous plaster or reconstituted stone, EPS + PU is 10 to 20 times lighter, rot-proof, unaffected by UV and goes up in a fraction of the time by simple bonding.
Moulding families
- Exterior cornices — wall coping, running string course, modern and crowned cornices, plinth cornices.
- Window decoration — window mouldings, full sill, keystone, pediment, brackets, sill moulding.
- Decorative pilasters — flat pilasters fixed to the wall, with matching capital and base.
- Decorative columns — free-standing round or fluted columns, with matching capital and base.
- Cladding and facing — corner quoins, rustication blocks, 3D panels and borders.
- Architectural ornament — rosettes, balusters, decorative corbels, multi-purpose profiles.
- Paints & adhesives — matching installation and finishing products.
Simple bonded installation
All our elements are fitted by bonding with a special exterior adhesive sealant : apply a bead to the back of the piece and press it gently against the substrate. Excess adhesive is wiped off with a damp cloth. On bulky pieces, add a few hammer-in anchors to back up the bonding.
The mouldings are delivered ready to paint : one coat of primer, then an acrylic facade paint suitable for exterior use — in the shade of your choice.
Help & advice
Frequently asked questions
Everything you need to know before ordering. Another question? Contact us.
15 to 25 years on average, depending on exposure and the quality of the installation. The polyurethane coating resists UV, water, frost and light impacts. Expanded polystyrene does not rot and does not degrade over time.
Yes, and it is even recommended for a high-end finish. Apply an exterior acrylic façade paint after a primer. Any colour you like — from neutral white to stone shades, tone-on-tone or contrasting depending on the façade.
By bonding with a special exterior adhesive sealant: a bead on the back, press onto the wall, wipe off the excess. For bulky pieces, add hammer-in plugs as a supplement. Our dedicated paints and adhesives are available in the Paints & Adhesives category.
A pilaster is a flat element fixed directly against the wall, forming a rectangular projection. A decorative column is free-standing, with a round or fluted section, placed in front of or beside the façade.
The impact-resistant versions (thick PU layer) are designed to withstand everyday knocks (a broom, a ball, and so on). In high-risk areas (walkways, shoulder height), choose pieces with a reinforced PU layer.