Pattex ONE FOR ALL adhesive
12,58 € HT15,10 € TTC
Paints & Adhesives
Our paints and adhesives are specifically suited to façade mouldings in EPS polystyrene and polyurethane: exterior adhesive sealant for installation, primers for surface preparation, acrylic façade paints compatible with the PU coating.
35
products
StoColor Dryonic X-black 15L
643,25 € HT771,90 € TTC
WMB MAX miter box + 93 cm saw
On request
WS JOINER
6,84 € HT8,21 € TTC
WS FIX
9,97 € HT11,96 € TTC
WS MDFIX
9,18 € HT11,02 € TTC
WS AQUA JOINER
11,53 € HT13,84 € TTC
WS FIBER FILLER
On request
Rhinst exterior covering mass
7,86 € HT9,43 € TTC
Metroresin matte resin
52,98 € HT63,58 € TTC
Glossy resin Metroresin
52,98 € HT63,58 € TTC
Complete installation system
- Special exterior adhesive sealant — strong adhesion on EPS and load-bearing substrates (concrete, brick, render).
- Primer — to prepare the PU surface before painting; it guarantees adhesion.
- Acrylic façade paint — resistant to UV, water and frost. Any colour on request.
- Finishing filler — to fill the joints and make the seams invisible.
Why dedicated products ?
Standard paints and adhesives can dissolve expanded polystyrene (solvents) or fail to bond lastingly to polyurethane coating. Our products are formulated specifically to be safe on EPS and to bond lastingly to PU.
Help & advice
Frequently asked questions
Everything you need to know before ordering. Another question? Contact us.
No — solvent-based adhesives can dissolve expanded polystyrene. Use only a special exterior adhesive sealant that is compatible with EPS.
Exterior acrylic façade paint, compatible with the polyurethane coating. Apply a coat of primer beforehand to ensure good adhesion.
Yes — the surface must be clean, dry and free of dust. For mouldings stored outdoors before fitting, a gentle wash with clean water (no high pressure) is recommended before painting.