Left Laminate finish Classic Oak L0206L
9,53 € HT11,44 € TTC
of which 0,05 € eco-contribution excl. VAT (0,06 € incl. VAT)
Decorative Slats
Decorative wall slats are the 2026 interior design trend: vertical battens that give a wall rhythm, create a sense of depth and improve acoustic insulation. Our Largo, Medio, Stretto and Sereno collections cover every style (Scandinavian, contemporary, loft, biophilic), together with their matching end trims.
102
products
Subcategories
Right end of the slat Classic oak L0206R
8,92 € HT10,70 € TTC
of which 0,04 € eco-contribution excl. VAT (0,05 € incl. VAT)
Left end slat Natural oak L0305L
9,51 € HT11,41 € TTC
of which 0,03 € eco-contribution excl. VAT (0,04 € incl. VAT)
Straight end slat Natural oak L0305R
8,94 € HT10,73 € TTC
of which 0,06 € eco-contribution excl. VAT (0,07 € incl. VAT)
Right end piece for white slat L0101R
On request
Left end piece for white slat L0101L
On request
Right end cap for white slat L0401R
On request
Left end piece for white slat L0101L
On request
Left end for white slat L0401L
On request
Right end for Classic oak slat L0106R
On request
Left end cap for white slat L0101L
On request
Right end for Classic oak slat L0106R
On request
Right end cap for white slat L0101R
On request
Right-hand end cap for Natural Oak slat L0105R
On request
Right end cap for white slat L0101R
On request
Right end cap for slat Natural Oak L0105R
On request
Right end of white slat L0101RP
10,77 € HT12,92 € TTC
of which 0,03 € eco-contribution excl. VAT (0,04 € incl. VAT)
Right end of the slats Light oak L0102R
8,91 € HT10,69 € TTC
of which 0,03 € eco-contribution excl. VAT (0,04 € incl. VAT)
Right end of the slats Light oak L0202R
8,91 € HT10,69 € TTC
of which 0,03 € eco-contribution excl. VAT (0,04 € incl. VAT)
Right end of the slats Gray oak L0103R
8,91 € HT10,69 € TTC
of which 0,03 € eco-contribution excl. VAT (0,04 € incl. VAT)
Left Laminate finish Classic Oak L0306L
9,52 € HT11,42 € TTC
of which 0,04 € eco-contribution excl. VAT (0,05 € incl. VAT)
Right end of the slats Light oak L0302R
8,93 € HT10,72 € TTC
of which 0,05 € eco-contribution excl. VAT (0,06 € incl. VAT)
Left Laminate finish Classic Oak L0206L
9,51 € HT11,41 € TTC
of which 0,03 € eco-contribution excl. VAT (0,04 € incl. VAT)
Right end of the slat Dark Oak L0104R
8,91 € HT10,69 € TTC
of which 0,03 € eco-contribution excl. VAT (0,04 € incl. VAT)
Top sellers in this category
Our slat collections
- Largo collection — wide slats, a structuring effect, ideal for rooms with high ceilings. 47 references + end pieces.
- Medio collection — intermediate width, a balance between rhythm and restraint. 51 references + end pieces.
- Stretto collection — narrow slats, dense rhythm, textured effect. 52 references + end pieces.
- Sereno collection — clean designs with soft finishes. 22 references.
- Regipro collection — a dedicated range (9 references, currently being updated).
- Kitchen Slats — a selection for worktops and splashbacks. 17 references.
Decorative and technical benefits
Looks: an elegant vertical rhythm, a sense of depth, instant modernity.
Acoustic insulation: the slats diffract sound and cut reverberation (can reach αw = 0.6 with an absorber behind).
Light thermal insulation: the air gap between the slats and the wall slows heat loss.
Reversible installation: bonded in place, no drilling, suitable for rented homes.
How to fit decorative wall slats in 5 steps
- Prepare the substrate — The wall must be clean, dry, flat and dust-free. On new plasterboard, apply a coat of primer.
- Mark out the layout — Pencil in the fixing lines. Recommended spacing: equal to the width of one slat for a balanced result.
- Apply adhesive to the back of the slat — Run a bead of exterior-grade sealant or neoprene adhesive down the back in a vertical zigzag.
- Bond and press — Set the slat against the wall and press firmly for 30 seconds. Check it is plumb with a level.
- Trim with a knife — Cut the top slat to suit the height of the room (Dartank slats are 2.75 m long, so you cut one end only).
Help & advice
Frequently asked questions
Everything you need to know before ordering. Another question? Contact us.
The recommended spacing is equal to the width of one slat. For slats 30 mm wide, allow a 30 mm gap. This regular spacing creates a balanced visual rhythm and makes full-length installation easier.
All our decorative slats are 2.75 m tall. For taller or lower rooms, simply cut from one end with a jigsaw or a utility knife (MDF slats cut easily).
Yes — vertical slats with gaps create sound diffraction that reduces reverberation. With an absorbent layer behind them (rock wool, foam), they become a genuine decorative acoustic panel.
Ideal for a Scandinavian style (pale slats on a pale background), a New York loft (dark slats contrasting with a concrete wall), a biophilic scheme (natural wood slats) or a contemporary look (lacquered slats).