EVEREST S1 polyurethane wall panel 60x120cm
69,85 € HT83,82 € TTC
Antique Bricks & Tiles
Our old brick range brings together 63 references of cement brick slips with an aged-brick effect (high-fidelity imitation). 7 collections cover every style: old tiles (22 refs), rusted bricks (aged turquoise/gold/rust effect), English bricks (cottage style), polished 19th-century tiling, SLIM 0.9 cm brick, diagonally sloping tiles and a pastel collection for children's rooms.
63
products
Subcategories
Old Polish classic
13,23 € HT15,87 € TTC
Old whitewashed polish
13,23 € HT15,87 € TTC
Ancient Polish Gothic
13,23 € HT15,87 € TTC
Corner tiles in old brick, old varnish
1,51 € HT1,81 € TTC
Old Polish lamp
13,23 € HT15,87 € TTC
Old Polish Gray
13,23 € HT15,87 € TTC
Old beige brown varnish
13,23 € HT15,87 € TTC
Old English Italian brick
11,98 € HT14,38 € TTC
Old English white brick
11,98 € HT14,38 € TTC
Old English gray brick
11,98 € HT14,38 € TTC
Old English brick Natural light
11,98 € HT14,38 € TTC
Old English rock brick
11,98 € HT14,38 € TTC
English corner tile in old brick (choose color)
1,32 € HT1,58 € TTC
Old English natural brick
11,98 € HT14,38 € TTC
7 collections, 7 moods
- Old brick tiles — 22 ref in natural, white, beige-brown (6.5 × 27 × 1.5 cm).
- Old rusted bricks — 7 ref with aged turquoise, gold and rust effect (6.5 × 27 cm).
- Old English brick tiles — 18 ref in grey, white, ecru (6.3 × 21 × 1.5 cm).
- Old polished brick tiling — 8 ref: 19th-century, old Polish grey, gothic, limewashed.
- SLIM old brick — 3 ref, 0.9 cm thick (6 × 21 cm), ideal for plasterboard.
- Slanted old tiles collection — 2 ref, Slanted Stara Cegła diagonal.
- Children's collection — 14 ref pastel bricks in pink/green/blue/yellow/red.
Why cement slips rather than real bricks?
Our slips in antique-brick-effect cement offer several advantages over genuine reclaimed bricks:
- Lighter (1.5 cm thick vs 5-10 cm) — can be fixed to plasterboard, no extra load on the structure.
- Calibrated — consistent thickness and geometry for easy fixing.
- Stable colours — choose your finish (natural/aged/pastel), no sorting required.
- Frost resistance guaranteed for exterior use.
- Visually identical to a reclaimed brick wall.
How to fit antique-brick-effect brick slips in 6 steps
- Prepare the wall — Flat, dry, dust-free surface. On concrete or blockwork: bonding primer. On an old painted wall: sand it to create a key.
- Set out the courses — Mark out a 1/2 stretcher bond (half-brick offset) typical of old walls. Start from the bottom to avoid adhesive runs.
- Prepare the adhesive mortar — C2 S1 adhesive mortar to EN 12004 (exterior) or water-repellent adhesive (damp interiors). Mix in small batches (30 min pot life).
- Butter the wall and the brick — Double buttering outdoors: U6 notched trowel on the wall (3 m² maximum) plus a thin coat on the back of each brick.
- Fix and tap home — Position, press with a slight twist, tap home with a rubber mallet. 5-7 mm spacers for even joints. Check the level.
- Point after 24 h — Remove the spacers. NHL3.5 hydraulic lime mortar joint (traditional look) or coloured water-repellent mortar. Brush dry after 1 h to rake the joints back.
Help & advice
Frequently asked questions
Everything you need to know before ordering. Another question? Contact us.
Our range consists of cement brick slips with a reclaimed-brick effect (high-fidelity imitation). These are not genuine reclaimed bricks — so they are lighter, consistently sized and suitable for plasterboard. The visual effect is identical to a wall of reclaimed brick.
The main sizes are 6.5 × 27 cm (old brick tiles, rusted bricks, polished old tiles) and 6.3 × 21 cm (English bricks). Thickness 1.5 cm. Sold as individual slips or in packs covering 0.5 m².
Ideal for an industrial New York loft (red or rusted bricks), an English cottage look (natural English bricks), a retro 19th-century style (polished old tiles) or a fun children's bedroom (pastel collection).
Both. Indoors (feature wall, headboard, kitchen splashback), use a standard adhesive plus a coloured mortar joint. Outdoors, use a C2 S1 adhesive mortar, a water-repellent joint and re-apply a water repellent every 5-10 years.
Choose a tinted NHL3.5 hydraulic lime mortar joint (grey or light ochre), brushed back slightly so that it sits just below the surface — this reproduces the look of old walls. A width of 7-10 mm gives a more rustic effect, 5-7 mm a more contemporary one.